Need data for a 200gr Accubond in a 300WSM

[Calvin]

Can anyone (Nosler?) help here? I've got a couple boxes and want it dropping between 35 and 45" at 500yds with a 200yd zero. This is to take advantage of my Leupold Boone & Crocket reticle.

 

[FOTIS]

What velocity are you getting from YOUR rifle?

BTW as far as exterior ballistic progrmas see the sticky topics in off topic and here!

 

[Calvin]

I have not loaded this bullet in mine before. I have 180gr Partitions shooting very well through is, but wanted to develop a load around the 200gr AccuBond also. When I looked in the current manual, the only 200gr loading is for the Partition. I imagine I could start there, but am fishing for some experience :grin:

 

[lefty315]

I am loading the 200 grain AccuBond to 2804 fps from my Kimber using H4350. My COL is 2.860. With a 200 yard zero I get a 5 inch drop at 300 and around 18 at 400. It seems to be on par with what the books say a 180 would be dropping running 3000 fps.

 

[Alaska]

In my Win 70 SS

300 WSM
Reloader 19 @ 68.0
200 AB
WLRM Primers
WW Cases

Vel: 2909 FPS

COL: 2.860"
Case Length: 2.100"
Trim Length: 2.090"

Another good load is the

WXR @ 70.0 Compressed
180 Nosler Part.
Vel: 3000 FPS