I am going to be loading new unfired brass for a rifle with a new barrel. Between breaking in the barrel and the new brass, I assume it is not worth doing any sort of load work up. The data is showing charge weight between 26.5 & 29.5gr, I was thinking about loading 27gr, is there any reason the go lower(other than pressure signs) or higher?
Will be a 6mmBR - Lapua brass, 70gr nos BT, and Accurate LT-32 powder
thanks
Will be a 6mmBR - Lapua brass, 70gr nos BT, and Accurate LT-32 powder
thanks