truck driver
Ammo Smith
- Mar 11, 2013
- 7,608
- 1,569
Not my first Rodeo doing this but the first time I had them shoot good for me out of my 1911 .45.
I cast my own bullets to cut the cost down for practice ammo. Though my cast bullets shoot as good or better than the commercially machine cast you can buy, the commercially swaged lead bullets are more consistent and more accurate at 50yds and for the most part will shoot right alongside jacketed bullets.
The downside of cast bullets is they are dirtier than jacketed bullets leaving lubricant grease deposits in the gun, powder coat like copper jacket bullets use no bullet lubricants.
I use dry powder and use a method called shake and bake to apply the paint. My tools are a poly plastic bowl with a sealable lid that has the #5 recycle code on the bottom, most food packaging plastic containers have this code in a triangle on the bottom, think Cool Whip and the clean empty container with the lid will get you started, some black 5mm airsoft plastic BBs will help create enough static electricity to help the paint to coat the bullets, a cheap toaster oven with a built in air frier makes it easier to get even heat flowing over the bullets and is what I use some flat trays or aluminum cake/pie pans for the bullets to set in the oven , a cheap oven thermometer so you can control the oven temperature set for 400 degrees and a pair of Harbor freight tweezers to pick up the coated bullets to put on the trays after coating, a pair of nitril gloves to keep your hands and bullets clean.
pictures of coated bullets and targets shot at 25yds off a rest to get the best accuracy and a chronograph to check your velocity. The first target is five shots to check the accuracy and the second target is 20 shots to check for fliers.




I cast my own bullets to cut the cost down for practice ammo. Though my cast bullets shoot as good or better than the commercially machine cast you can buy, the commercially swaged lead bullets are more consistent and more accurate at 50yds and for the most part will shoot right alongside jacketed bullets.
The downside of cast bullets is they are dirtier than jacketed bullets leaving lubricant grease deposits in the gun, powder coat like copper jacket bullets use no bullet lubricants.
I use dry powder and use a method called shake and bake to apply the paint. My tools are a poly plastic bowl with a sealable lid that has the #5 recycle code on the bottom, most food packaging plastic containers have this code in a triangle on the bottom, think Cool Whip and the clean empty container with the lid will get you started, some black 5mm airsoft plastic BBs will help create enough static electricity to help the paint to coat the bullets, a cheap toaster oven with a built in air frier makes it easier to get even heat flowing over the bullets and is what I use some flat trays or aluminum cake/pie pans for the bullets to set in the oven , a cheap oven thermometer so you can control the oven temperature set for 400 degrees and a pair of Harbor freight tweezers to pick up the coated bullets to put on the trays after coating, a pair of nitril gloves to keep your hands and bullets clean.
pictures of coated bullets and targets shot at 25yds off a rest to get the best accuracy and a chronograph to check your velocity. The first target is five shots to check the accuracy and the second target is 20 shots to check for fliers.









