N560 300HH# 1

[salmonchaser]

Ordered a pound of VV N560 to try in my 300 HH. #1 She has done ok with rl 26 and 19 but supply is dwindling. H4350 and some others left me unimpressed.
I was going to do a ladder test but decided to go for broke and loaded .5 gr under max. I pulled one shot but I think I'll order 8 pounds of 560. The targets were at 100 then plus 2moa for 300.

 

[JD338]

Great accuracy Don. Nice work at the bench and the range. What speed are you getting?

JD338

 

[salmonchaser]

Great accuracy Don. Nice work at the bench and the range. What speed are you getting?

JD338

3140, faster than I expected. SD was 13.4 but I don't think I'll change anything.

 

[JD338]

That's pretty good speed. I'm assuming 180 gr bullets.

JD338

 

[salmonchaser]

That's pretty good speed. I'm assuming 180 gr bullets.

JD338

Yes, 180 accubonds.

 

[Blkram]

That'll do!
Now go hunting!

 

[JD338]

Rock n roll!

JD338

 

[salmonchaser]

Only drew an Oregon elk and deer tags this year, probably use the 300 HH and elk and the 275 rigby for deer.

 

[NYDAN]

Very nice!

 

[filmjunkie4ever]

Nothing to not love about that Don!! Well done!

 

[RL338]

At one time Vihtavuori powders were too pricey for most and now they are the affordable option. With results like yours an 8lber would be a wise call.

 

[Guy Miner]

Nice! Only thing I'd do to that load, is load up a hundred more of them...

Guy

 

[salmonchaser]

Nothing to not love about that Don!! Well done!

The box of 338 you sent me arrived, thanks again.

 

[Wenaha]

I have been very pleased with VV powders. I am using N150 in my 404 Jeffery and .375 H&H and VERY pleased with N560 in my 7MM RM and 280AI. I am now working loads for my 308 Norma Magnum with N560... data is hard to find, but I am confident that I will find THE load for this rifle. I have bought an large jug of N560.

 

[salmonchaser]

Last outing with the 300 HH produced pretty good groups using N560 and 180 Accubonds.
What I failed to mention was I was tight to the Lands. .014 off. This morning I decided to try my standby load of 69.0 Gr. Of RL19 /180 AccuBond/ at .014 off.
First three rounds into .174 inches.
I quit right there. 100 yards/concrete bench/no wind/no mirage/ 64 degrees.
I've always started Accubonds at .05 and gone as far as .1 off as they seem to like some jump.
I fired three more groups that all came in at about 3/4 MOA.
Pretty convinced I've got this number one figured out.

 

[JD338]

Last outing with the 300 HH produced pretty good groups using N560 and 180 Accubonds.
What I failed to mention was I was tight to the Lands. .014 off. This morning I decided to try my standby load of 69.0 Gr. Of RL19 /180 AccuBond/ at .014 off.
First three rounds into .174 inches.
I quit right there. 100 yards/concrete bench/no wind/no mirage/ 64 degrees.
I've always started Accubonds at .05 and gone as far as .1 off as they seem to like some jump.
I fired three more groups that all came in at about 3/4 MOA.
Pretty convinced I've got this number one figured out.

Nice shooting Don. She's a keeper.

JD338

 

[RL338]

Sure looks like you got it figured out for sure.

 

[sako2]

Last outing with the 300 HH produced pretty good groups using N560 and 180 Accubonds.
What I failed to mention was I was tight to the Lands. .014 off. This morning I decided to try my standby load of 69.0 Gr. Of RL19 /180 AccuBond/ at .014 off.
First three rounds into .174 inches.
I quit right there. 100 yards/concrete bench/no wind/no mirage/ 64 degrees.
I've always started Accubonds at .05 and gone as far as .1 off as they seem to like some jump.
I fired three more groups that all came in at about 3/4 MOA.
Pretty convinced I've got this number one figured out.

I would say so. Nice work.