25-06

[ofdscooby]

I just ordered up some 115 BT's for my new 25-06 the first 50 I put through it were 110 Accubonds and I was very pleased but I want to try something different. I have IMR 4831 and 4350 RL 22 & 19 on hand. Can any one point me in the right direction of a good load with any of these powders. For the 110 Accubonds 47.5 of 4350 was the magic number for me.

 

[JD338]

Take a look at RL 25 and Retumbo.

JD338

 

[nitis]

Mine loves 100 gr bts with RL 17

 

[ofdscooby]

Mine loves 100 gr bts with RL 17

I was thinking about going lighter but I'm already shooting 90's out of my .243 so I wanted to go a little heavier on the 25-06 and put a little more versatility to the quiver

 

[nitis]

I would still try the 17 it groups the 110s just as good and the poi at 100 yds is only 1" low have yet to chrono that but 3500 with the 100s is acheivable

 

[Guy Miner]

With my .25-06, am getting good velocity and accuracy with Retumbo and the 115's.

 

[6mm Remington]

My wife's 25-06 likes IMR4350 and that is with the 120 gr. Nosler Partition. I'm going to work on a load next spring for the 110 gr. AccuBond though. I'll probably try some IMR4350 with it, and H4831SC just for starters.

 

[FOTIS]

H4831. RL22 25 H1000 or retumbo.

 

[gunjunky]

I have used RL-19 with 110 accubonds and the 115 bt&bst with excellent results in 4 different rifles.

Remmington 700sps - 1/2 grp 100 tds
Ruger m77 MKII Match target -1/4 grp 100 yds
Ruger #1 - 3/4 grp (22 inch barrel)
Kleingunther Custom -1/2 100yds

Using published Nosler data for the 115 BST in the current manuel

 

[SJB358]

Gun Junky, thanks for that data. Looking forward to giving it a try! Scotty

 

[cooker300]

my brother use's imr 4350 @ 48.0 gr with 115gr partions