Hunter2011
Beginner
- Dec 30, 2016
- 28
- 0
Now that Nolser has introduced their 265 Gr. AccuBond LR, can the old 338 be turned into a new creature as far as mid-long range shooting? Well, that's what I have endeavored to find out. I came into this project understanding that the 338 WM was not necessarily designed to shoot the long bullets of this day, but has been adapted in such a way that it works pretty well. I know some may say why not just buy a new rifle in 300 WM. My response is I already have a 300 RUM (Superior to the WM ballistic wise) that can fling a 220 ELD'X at 3000FPS. When I say long range I mean 350-650 yards. Which in this day is hardly considered a long shot.
I normally shoot a 225 AccuBond that is going about 2800 on the dot, but last year I shot a cow elk with that load at 355 yards, clipping the heart and punching through both lungs. When I shot I was astonished because the elk didn't lurch or stumble but just took off and ran about 100 yards before slowing down and eventually toppling over. When I got up to her she was dead as a rock, but I could not identify an entrance or exit at first glance. Long story short, I believe the lack of velocity prevented full expansion of the bullet which was expected because its a larger cal., premium hunting bullet made for high weight retention at 3000+. So I resolved to shoot a more fragile bullet that would expanded more at lower velocities and i think the 265 Gr. Acb LR might just the the ticket.
As far as know I'm the first person to ever load and publish my findings using the LR in a 338WM. Last week ordered some .338 AccuBond LR from Grafs. for $60/100ct. I did a seating test and found that the the average of touching the lands was at 3.559. So I decided to seat .064 off at 3.495. Over the week after looking at several different manuals for 250,275,300 Gr. loads I settled on working up to 72.0 Gr. of H4831SC. This is going up pretty hot for a 265 grainer, but I want to see how fast I can them them(optimistic goal 2600) before I get pressure signs.
I'am excited to see how they fly and how fast they go. I will try to get to the range in the next week and publish my results.
This is load is published strictly for experimentation. Any attempt to replicate this load is not recommended. Hunter2011 will not be held responsible for damage done to person(s) or equipment involved in replication of loads published. Think smart, load smart, shoot smart, safety first.
I normally shoot a 225 AccuBond that is going about 2800 on the dot, but last year I shot a cow elk with that load at 355 yards, clipping the heart and punching through both lungs. When I shot I was astonished because the elk didn't lurch or stumble but just took off and ran about 100 yards before slowing down and eventually toppling over. When I got up to her she was dead as a rock, but I could not identify an entrance or exit at first glance. Long story short, I believe the lack of velocity prevented full expansion of the bullet which was expected because its a larger cal., premium hunting bullet made for high weight retention at 3000+. So I resolved to shoot a more fragile bullet that would expanded more at lower velocities and i think the 265 Gr. Acb LR might just the the ticket.
As far as know I'm the first person to ever load and publish my findings using the LR in a 338WM. Last week ordered some .338 AccuBond LR from Grafs. for $60/100ct. I did a seating test and found that the the average of touching the lands was at 3.559. So I decided to seat .064 off at 3.495. Over the week after looking at several different manuals for 250,275,300 Gr. loads I settled on working up to 72.0 Gr. of H4831SC. This is going up pretty hot for a 265 grainer, but I want to see how fast I can them them(optimistic goal 2600) before I get pressure signs.
I'am excited to see how they fly and how fast they go. I will try to get to the range in the next week and publish my results.
This is load is published strictly for experimentation. Any attempt to replicate this load is not recommended. Hunter2011 will not be held responsible for damage done to person(s) or equipment involved in replication of loads published. Think smart, load smart, shoot smart, safety first.