TNBillyEarl
Beginner
- Jan 31, 2021
- 82
- 285
This truly has me befuddled. I have a T3x 7mmRM that in the plastic stock is shooting consistent groups every time. The last 3 times out with it in the polymer stock it has been .6, .7, and .6 with a load it has always liked. Now to my issue:
I bedded this Boyd's in the pics below. The pics have a lot of glare and such so that it hard to tell anything. This is the 3rd stock I have bedded and this was (so I thought) the best job by far. But with the exact same loads above I can't get this to shoot anything but 2" groups. All three times out it has been 1.9, 2.0, and 2.0.
First, what are the things I could have done wrong?
Second, do I just grind it all out and start over?
It's free floated. It doesn't rock. Torque and all is to spec. Centered. Please advise.
B
![20240612_201149.jpg 20240612_201149.jpg](https://forum.nosler.com/data/attachments/18/18474-0fbc0ecd21d7c2634c36a3547533d5bd.jpg)
![20240612_201156.jpg 20240612_201156.jpg](https://forum.nosler.com/data/attachments/18/18475-32e8777993e6a143d6c4c836fae07f85.jpg)
I bedded this Boyd's in the pics below. The pics have a lot of glare and such so that it hard to tell anything. This is the 3rd stock I have bedded and this was (so I thought) the best job by far. But with the exact same loads above I can't get this to shoot anything but 2" groups. All three times out it has been 1.9, 2.0, and 2.0.
First, what are the things I could have done wrong?
Second, do I just grind it all out and start over?
It's free floated. It doesn't rock. Torque and all is to spec. Centered. Please advise.
B
![20240612_201149.jpg 20240612_201149.jpg](https://forum.nosler.com/data/attachments/18/18474-0fbc0ecd21d7c2634c36a3547533d5bd.jpg)
![20240612_201156.jpg 20240612_201156.jpg](https://forum.nosler.com/data/attachments/18/18475-32e8777993e6a143d6c4c836fae07f85.jpg)