Griffbl
There is no Replacement for Placement.
- Sep 7, 2025
- 33
- 36
my thoughts too Guy.....thank youInteresting...
I've no need for it, but it's interesting anyway.
Guy
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
my thoughts too Guy.....thank youInteresting...
I've no need for it, but it's interesting anyway.
Guy
the photo looks like it could be the case, (no pun intended) but no leakage. case is still airtight. Just FYI.Looks like some gas leakage around that primer as well
looks very similar indeed to anProbably higher than that.
THE NEXT ISSUE WILL BE HAVING THE ABILITY TO RELOAD...................NOT SURE IF FED GOT ALL THE KINKS WORKED OUT OF THAT PROCESS YET
Spot on TexasLife...that is exactly the idea....said another way, it was to duplicate a 7mm PRC in a smaller case ,and with a 20" barrel. Exceeds velocity of a 7mm PRC when both using 24" barrels...again, that was the IDEA.THE BIG DIFFERENCE IS SUPPOSED TO BE WITH 15K EXTRA PSI ON MAX FOR THE ADVANTAGE ON SMALLER CAPACITY CASES. NOTHING DIFFERENT THAN THE 277FURY, BUT W/O THE 2-PIECE CASE. SURE YOU CAN GET THE SAME VELOCITIES WITH THE SAME BARREL LENGTH OF THE 7BC, BUT REQUIRES A LARGER CAPACITY CASE.............WORKS FOR ME. THEM GOING WITH A 20" IS FOR THE PEOPLE THAT USE SUPPRESSORS TO SAVE ON LENGTHS.
Spot on TexasLife...that is exactly the idea....said another way, it was to duplicate a 7mm PRC in a smaller case ,and with a 20" barrel. Exceeds velocity of a 7mm PRC when both using 24" barrels...again, that was the IDEA.
I agree...looks very similar indeed dimensionally to a .280 AI.While it sounds crazy, I’d have to guess Federal has done some homework.
The idea of an 06 case making 28 Nosler speed in an 06 sized rifle sounds like something I’d love to have elk hunting. Time will tell. I heard the case is reload able so that’s a plus.
Heard there are 12-13 makers lined up to chamber them after it’s official.
Gotta admit, a 170 grain Terminal Ascent at 3150 from a 7 1/2 pound all up rifle sounds like a complete hammer, but a feather to carry. Mainly those are the ballistics that led me to the Mashburn Super, but I’m a pound heavier and a round less in the mag of said cartridge.
i wish they'd give psi results on their max loads per powders.My original post has now been updated with comments from Federal Ammunition AND with loading data which I will post again here. If I need to move the update down here at the bottom of this thread, please advise. I combined it to simply have all the information in one post. thank you all.
Load data per Federal: https://www.federalpremium.com/on/d...try-Reloading-Data-Sheet_web-disclaimer-2.pdf
Agreed! from what i have read about Ramshot in the '06, that sounds like a promising start given Federal's data IF I were to ever load this thing....we will see what happens with Federal's replacement ammunition.i wish they'd give psi results on their max loads per powders.
I seem to remember when Weatherby started to chamber the 338 Lapua in the MarkV people were having issues with Hornady brass sticking in the chamber. They must cut their chambers on the tight side.The Rifle Manufacturer (again, in my example Weatherby) i.e. an incorrectly cut chamber or reamer of incorrect dimensions.
Thank you so much. Me too. I will post results when new ammunition arrives.I seem to remember when Weatherby started to chamber the 338 Lapua in the MarkV people were having issues with Hornady brass sticking in the chamber. They must cut their chambers on the tight side.
Hopefully the newer ammo will solve your issue.
I'm eyeing up a Weatherby 307 Alpine in it. I just got two new rifles this year for hunting that I never carried yet, it's hard to get a third but I am very intrigued.
Weatherby actually had field testers running this caliber for over a year on many different hunts, in many different regions before they offered it on the open market. Federal supposedly has been testing it for roughly 3 years. It is the first major change in the rifle word for many many years, so the skepticism was expected. There was a time that guns moved from a low PSI to a 65k with their rounds, I'm sure every one thought they were going to blow up then, but as is everything we do today, the limits were pressed, advancements were made in design and it became the new normal. I'm not concerned what so ever with it at this point.I just don’t trust them. Copper cup primers aren’t designed to consistently operate at this rounds pressure. An unmodified factory rifle, with factory ammo, and a mallet is needed to open the bolt. It’s a 80k psi SAAMI max cartridge. What do you suppose an overpressure round is running that will lock the action with a steel case? They are too close to redline for manufacturing mistakes not to be very dangerous. Also, there’s no way that Federal isn’t going to downplay hiccups. They have too much skin in the game. The public looks to be the test bed for this new hot rod round. Twist a hot rods motor tight enough and it will let go. This is just my opinion mind you, I’m sure many may disagree.
Edit: Food for thought. A 125% proof round is 100k psi, and that’s not locking the action during proof testing. That’s a LOT of pressure to have 3” from your nose.
I really like the STW, I have not had much time with that cal as I've never owned one. I did some load development on one for my brother. It was a great shooting gun though. The .284 line up has so many options that I really like.Since we are not allowed suppressors here in Canada, a 7 magnum with a 20” barrel has no appeal for me.
I have been perfectly happy with the 7mm Rem Mag’s performance.
I had no desire for the STW and would not have went there except that the rifle, a customized LH Sako for $800 that weighed 7 lbs bare, was a steal of a deal that I couldn’t pass up when I saw it. It has become a favourite, and its barrel is a bit faster than normal, producing 3222 fps with 160 gr ammo from its 24” barrel. It is also the most accurate rifle I own. I have taken more game with it than any other.
Is it perfect for everything? No, but it has worked on a wide variety of game over the years. If I need extra velocity and a flatter cartridge, this is the rifle I reach for, as it is proven, and I have a good supply of its preferred factory ammo that should last me the rest of my days.
Yes, the 7 BC is interesting, but I do not believe that I will be getting one.