- Thread starter
- #41
- Oct 30, 2004
- 24,344
- 3,185
That is what you get for reading the posts Bullet! Now you need to get a 48.
If you could build a dream rifle, what would it be?
- Thread starter FOTIS
- Start date
TRIC
Beginner
- Dec 14, 2005
- 200
- 0
Searcy & Co., sidelock double, 470 Nitro.
Always carry enough gun!
Always carry enough gun!
375hh1973
Beginner
- Mar 31, 2007
- 196
- 69
Browning BAR Long-Trac synthetic in .35 Whelen.
baltz526
Handloader
- Sep 25, 2005
- 1,074
- 8
OK but just writing what it is, will probably leed to spending money. I think i would take one of my rem short actions, rebarrel it with a match grade 20" in a very light conture. chambered in a 260. Then i would put it in a very light stock, put a great compact scope on it 2.5x8x38 vx3. work up a load with 120gr nosler ballistic tips. put a claw sling on it and pack this 6lb rifle with spring in my step.
caribouhunter
Beginner
- Mar 31, 2009
- 218
- 5
dreaming!!! that they make it and that i can afford it.
a nosler custom (48 would be ok too :wink: )
in 280 AI LEFT HAND 8)
a nosler custom (48 would be ok too :wink: )
in 280 AI LEFT HAND 8)
- Thread starter
- #47
- Oct 30, 2004
- 24,344
- 3,185
6ppcar":ndmw3oze said:
you're kiddin right?
..............................
They already made/make all 3 of mine, the problem is finding the other 2 I can afford. I lucked out finding a shilen barreled maser 98 in 280 rem for cheap at a gunshow, a local smith's half-finished project the buyer decided to back out on. Just added a Richards thumbhole stock with some purdy grain and a buehler style safety and voila... my first perfect rifle. It shoots good too.
The savage 99 in 358 win would do nicely for my close work and any bigger game I might hunt someday. Still looking for that one.
The 3rd will be a lightweight mauser 98 or 96 in 6.5 swede or 257 roberts with a splinter curly maple stock and a cute little 22" pencil barrel for when I don't feel like lugging the .280 around. Top the light gun with a 2X7 German zeiss with the 3A reticle, and the Burris 3X9 BDC that's already on my 280, maybe a Marbles tang sight on the M99 and We're cookin with gas!
All of the above should shoot to 1" or so with good handloads, I guess I'd give the savage a little wiggle room on that one. I'm not building a target rifle, so that'll do. No special lapping, blueprinting or Lilja barrels required, just a reasonable trigger pull and good bedding. I guess I'm lucky, my dream guns are all easily obtainable. Now if you start talking things I'd like to collect... Ever hear of an Stg 44?
The savage 99 in 358 win would do nicely for my close work and any bigger game I might hunt someday. Still looking for that one.
The 3rd will be a lightweight mauser 98 or 96 in 6.5 swede or 257 roberts with a splinter curly maple stock and a cute little 22" pencil barrel for when I don't feel like lugging the .280 around. Top the light gun with a 2X7 German zeiss with the 3A reticle, and the Burris 3X9 BDC that's already on my 280, maybe a Marbles tang sight on the M99 and We're cookin with gas!
All of the above should shoot to 1" or so with good handloads, I guess I'd give the savage a little wiggle room on that one. I'm not building a target rifle, so that'll do. No special lapping, blueprinting or Lilja barrels required, just a reasonable trigger pull and good bedding. I guess I'm lucky, my dream guns are all easily obtainable. Now if you start talking things I'd like to collect... Ever hear of an Stg 44?
Well, here is my dream rifle. It just arrived a few weeks back.
Pre 64 M70, full true job and 24" #2ish (.605" muzzle dia) barrel done by Krieger in 257 Roberts
Sunnyhill bottom metal
Exhibition grade Calif walnut fully glass bedded tang to tip
S&K contoured rings
VX3 2.5-8 w/ B&C reticle
All metal to include rings and bases rust blued
Gunsmith is Glen Morovits of Newell, SD (he's worked off and on for Dakota Arms, Bob Searcy double rifles and Imperial Arms)
Three years in the build
Recontoured tang with blind action screw hole
Enjoy!
Pre 64 M70, full true job and 24" #2ish (.605" muzzle dia) barrel done by Krieger in 257 Roberts
Sunnyhill bottom metal
Exhibition grade Calif walnut fully glass bedded tang to tip
S&K contoured rings
VX3 2.5-8 w/ B&C reticle
All metal to include rings and bases rust blued
Gunsmith is Glen Morovits of Newell, SD (he's worked off and on for Dakota Arms, Bob Searcy double rifles and Imperial Arms)
Three years in the build
Recontoured tang with blind action screw hole
Enjoy!
DrMike
Ballistician
- Nov 8, 2006
- 37,404
- 6,224
A lovely example of art. Tell us how it shoots. Any idea of loads you will try?
Dr. Mike,
Just sent you a PM asking you a question how your IMR 8208 and 100 e-tip combo worked.
So far I've been really focusing on the e-tips as I had purchased 600 of them. My CED M2 chron was not working for a couple of range sessions so some of my results are inconclusive.
Also, I didn't discover Nosler's suggested minimum seating depth of .05" until just yesterday and had started at .03". And, Nosler also suggests starting 2 gr under their listed max charges in the #6 Nosler manual. Actually popped a primer out with 49 gr of H4831sc and the e-tip as I was 3 gr over their max. OUCH!
This rifle shows ZERO pressure indicators until the primer popped. If I'd had my chrono running I might have see it coming with incrementally reduced increase in vel for each .5 gr increase of powder.
Have been using new WW-Super +P brass and either CCI200 or WLR primers.
This thing, having full wood to metal contact in the barrel channel, is very picky about heating up; only allowing me 3-shot groups. Fine by me. My testing temps have been 60 to 85 deg F, shooting in the am but having to quit by noon as I'm getting sun light bounce off the ground which screws up the vel readings.
I first started with the Sierra 100 sp and IMR 4350/CCI200. I stopped at 48 gr and had a 1.17" group. Not sure of vel.
I did load some IMR 8208, e-tips and CCI 200 running the Hodgdon wt range from 37.1 gr to 39.6 gr. My best groups was .97" (37.1), worst was 2.6" (38.6). 39.6 gr had a decent 1.45" group.
Then H4350, e-tips and CCI 200 shooting 4-shot groups as I was still trying the get the chrono working and I need 4-shots for a SD. I ran .5 increments from 39 to 41 gr. 40.5 looked promising with a .52" 3-shot group. The 4ths shot opened it up to 1.09" I ran some more groups with
40.3 and 40.6 gr and got 1" and .8" groups respectively. Then a friend was going to the range with his Oehler 35p chrono and graciously allowed me to shoot some 40.5 gr vel readings.
45 ES
17 SD
2983 fps, 5-shots
3-shots into 1.08" and 5 into 3.13"
See, I told you. This rifle will not groups 4 or 5 shots.
At this point I decided to try some 100 gr TTSX. These little guys like to shoot!
I tried John Barsness' load of 100 gr TTSX and Ramshot Hunter; his charge being 47 gr. Again, CCI 200, .03" off lands. 44.5 gr to 47 gr gave consistent 1.25" to 1.5" groups. I was able to shoot 47 gr over the Oehler 35p and got the following. Oh yeah, I also did a primer test that day too. The WLR primer beat the other so I'll put down those numbers.
21 ES
8 SD
3176 fps
3 shots into .79"
5 shots into 2.16"
I then moved on to IMR 4350 and the 100 TTSX/CCI 200 combo; .030" off the lands. 43 to 45 gr range in .5 increments. Still no working chrono. Best was 43 gr for 1.48". 45 gr was worst with 2.43". Time to move on.
I was taking an interest in Hunter after my Oehler readings so I tried 43 to 46 gr with the e-tip and WLR primers. By now I had two new CED sensors and was getting some readings. But, I was getting high sun angle issues and actually backed my car upto the sensors and opened the trunk lid to provide shade on the ground to eliminate the sun's reflection off the ground. My old Oehler M33 never had this problem.
Anyway,
43 gr = no vel
43.5 gr = 3081 fps
44 gr = 3093 fps
44.5 = no vel
45 = no vel
45.5 = 3208 fps
46 = 3205 fps
I believe 45 gr is max in my rifle
H4831sc, WLR, e-tip
I started testing this before my chrono was working and started at 47 gr and stopped when I hit 49 and popped the primer. I came back to H4831sc when the chrono was working and the charge wt range was 44 to 46 gr.
44 = 2929 fps
44.5= 2979 fps
45= 3053 fps
45.5= 3061 fps (1.1" group)
46 = starting to get high sun bounce but one reading was 3125 fps
Rel 19, WLR and e-tip
45 gr to 48 gr
45 = 3040 fps
45.5= 3081 fps
46 = 3126 fps
46.5= 3164 fps (my rifles max)
47 = 3227 fps
47.5 = 3277 fps
48 = got one reading @ 3337 fps
Nothing under 2" groups. Time to move on.
IMR 4064, e-tips, CCI 200
I now have a fully functioning chrono and what times I can shoot over it.
34 to 36.5 gr wt range.
34 = 2808 fps (best group @ 1.38")
34.5 = 2841 fps
35 = 2864 fps
35.5 = 2905 fps
36 = 2969 fps
36.5 = 2966 fps
The remaining groups had nothing better than 2".
IMR 4350, e-tip, CCI 200
39.5 = 2919 fps (1.12" group)
40 = 2982 fps
40.5 = 3024 fps
41 = 3061 fps
41.5 = 3079 fps
42 = 3109 fps
The remaining groups had nothing better than 2.6".
Next is Varget which I test either later today or tomorrow am along with the IMR 8208 so that I can get some good vel readings.
Now, that I have a working chrono and understand more about the what to look for as far as trustworthy load data for the 257 Roberts, I should be able to stay out of the danger zone.
Oh, and I'll have a basically new CED M2 chrono up for sale come Oct when I get my new Oehler 35p.
Just sent you a PM asking you a question how your IMR 8208 and 100 e-tip combo worked.
So far I've been really focusing on the e-tips as I had purchased 600 of them. My CED M2 chron was not working for a couple of range sessions so some of my results are inconclusive.
Also, I didn't discover Nosler's suggested minimum seating depth of .05" until just yesterday and had started at .03". And, Nosler also suggests starting 2 gr under their listed max charges in the #6 Nosler manual. Actually popped a primer out with 49 gr of H4831sc and the e-tip as I was 3 gr over their max. OUCH!
This rifle shows ZERO pressure indicators until the primer popped. If I'd had my chrono running I might have see it coming with incrementally reduced increase in vel for each .5 gr increase of powder.
Have been using new WW-Super +P brass and either CCI200 or WLR primers.
This thing, having full wood to metal contact in the barrel channel, is very picky about heating up; only allowing me 3-shot groups. Fine by me. My testing temps have been 60 to 85 deg F, shooting in the am but having to quit by noon as I'm getting sun light bounce off the ground which screws up the vel readings.
I first started with the Sierra 100 sp and IMR 4350/CCI200. I stopped at 48 gr and had a 1.17" group. Not sure of vel.
I did load some IMR 8208, e-tips and CCI 200 running the Hodgdon wt range from 37.1 gr to 39.6 gr. My best groups was .97" (37.1), worst was 2.6" (38.6). 39.6 gr had a decent 1.45" group.
Then H4350, e-tips and CCI 200 shooting 4-shot groups as I was still trying the get the chrono working and I need 4-shots for a SD. I ran .5 increments from 39 to 41 gr. 40.5 looked promising with a .52" 3-shot group. The 4ths shot opened it up to 1.09" I ran some more groups with
40.3 and 40.6 gr and got 1" and .8" groups respectively. Then a friend was going to the range with his Oehler 35p chrono and graciously allowed me to shoot some 40.5 gr vel readings.
45 ES
17 SD
2983 fps, 5-shots
3-shots into 1.08" and 5 into 3.13"
See, I told you. This rifle will not groups 4 or 5 shots.
At this point I decided to try some 100 gr TTSX. These little guys like to shoot!
I tried John Barsness' load of 100 gr TTSX and Ramshot Hunter; his charge being 47 gr. Again, CCI 200, .03" off lands. 44.5 gr to 47 gr gave consistent 1.25" to 1.5" groups. I was able to shoot 47 gr over the Oehler 35p and got the following. Oh yeah, I also did a primer test that day too. The WLR primer beat the other so I'll put down those numbers.
21 ES
8 SD
3176 fps
3 shots into .79"
5 shots into 2.16"
I then moved on to IMR 4350 and the 100 TTSX/CCI 200 combo; .030" off the lands. 43 to 45 gr range in .5 increments. Still no working chrono. Best was 43 gr for 1.48". 45 gr was worst with 2.43". Time to move on.
I was taking an interest in Hunter after my Oehler readings so I tried 43 to 46 gr with the e-tip and WLR primers. By now I had two new CED sensors and was getting some readings. But, I was getting high sun angle issues and actually backed my car upto the sensors and opened the trunk lid to provide shade on the ground to eliminate the sun's reflection off the ground. My old Oehler M33 never had this problem.
Anyway,
43 gr = no vel
43.5 gr = 3081 fps
44 gr = 3093 fps
44.5 = no vel
45 = no vel
45.5 = 3208 fps
46 = 3205 fps
I believe 45 gr is max in my rifle
H4831sc, WLR, e-tip
I started testing this before my chrono was working and started at 47 gr and stopped when I hit 49 and popped the primer. I came back to H4831sc when the chrono was working and the charge wt range was 44 to 46 gr.
44 = 2929 fps
44.5= 2979 fps
45= 3053 fps
45.5= 3061 fps (1.1" group)
46 = starting to get high sun bounce but one reading was 3125 fps
Rel 19, WLR and e-tip
45 gr to 48 gr
45 = 3040 fps
45.5= 3081 fps
46 = 3126 fps
46.5= 3164 fps (my rifles max)
47 = 3227 fps
47.5 = 3277 fps
48 = got one reading @ 3337 fps
Nothing under 2" groups. Time to move on.
IMR 4064, e-tips, CCI 200
I now have a fully functioning chrono and what times I can shoot over it.
34 to 36.5 gr wt range.
34 = 2808 fps (best group @ 1.38")
34.5 = 2841 fps
35 = 2864 fps
35.5 = 2905 fps
36 = 2969 fps
36.5 = 2966 fps
The remaining groups had nothing better than 2".
IMR 4350, e-tip, CCI 200
39.5 = 2919 fps (1.12" group)
40 = 2982 fps
40.5 = 3024 fps
41 = 3061 fps
41.5 = 3079 fps
42 = 3109 fps
The remaining groups had nothing better than 2.6".
Next is Varget which I test either later today or tomorrow am along with the IMR 8208 so that I can get some good vel readings.
Now, that I have a working chrono and understand more about the what to look for as far as trustworthy load data for the 257 Roberts, I should be able to stay out of the danger zone.
Oh, and I'll have a basically new CED M2 chrono up for sale come Oct when I get my new Oehler 35p.
6mm Remington
Ammo Smith
- Feb 27, 2006
- 5,255
- 626
GSSP,
You have an absolutely gorgeous rifle there! It is incredible to say the least. When I looked at those pictures, I thought I died and went to heaven!!! That .257 Roberts is quite a cartridge too!
You have an absolutely gorgeous rifle there! It is incredible to say the least. When I looked at those pictures, I thought I died and went to heaven!!! That .257 Roberts is quite a cartridge too!
I think something to plink with at long range.
So, it would start with a Stillers Viper SS or TAC action. Then add a Pac-Nor Super Match 7mm 1-9" Polygonal barrel, likely 28" maybe 30". Not sure what cartridge yet,,,,,
but would like enough capacity to drive the JLK 180 gr. around 3000 + fps, if not more.
Also haven't decided on the stock, but pretty sure it would have a Nightforce sitting on top when done.
Dave
So, it would start with a Stillers Viper SS or TAC action. Then add a Pac-Nor Super Match 7mm 1-9" Polygonal barrel, likely 28" maybe 30". Not sure what cartridge yet,,,,,
but would like enough capacity to drive the JLK 180 gr. around 3000 + fps, if not more.
Also haven't decided on the stock, but pretty sure it would have a Nightforce sitting on top when done.
Dave
I loved the model 70 ,257 Roberts. It is sooooooooo beautiful that I could not hunt with it.
I am a composite stock, bead blast, utilitarian kind of guy, function also makes things beautiful. The Remington that Guy has is my idea of the perfect hunting rifle. I thought the same thing the last time I saw it. In fact I have several similar to it. My perfect rifle is essentially that rifle in a 7mm mag size (long bullet lots of powder) that will let me shoot small groups at 300 yards. I have been striving to complete that goal for a couple of years now and may start over again this winter. We will see. :grin: :grin:
I am a composite stock, bead blast, utilitarian kind of guy, function also makes things beautiful. The Remington that Guy has is my idea of the perfect hunting rifle. I thought the same thing the last time I saw it. In fact I have several similar to it. My perfect rifle is essentially that rifle in a 7mm mag size (long bullet lots of powder) that will let me shoot small groups at 300 yards. I have been striving to complete that goal for a couple of years now and may start over again this winter. We will see. :grin: :grin:
Desert Fox
Handloader
- Aug 14, 2006
- 1,965
- 3
GSSP, you just posted my dream rifle. Everything up to the choice of chambering. The only thing I would change is the scope. I have one just for that rifle... an El Paso Weaver
Powerstroke
Handloader
- Feb 24, 2006
- 1,799
- 60
D-Fox
I had to laugh just a little and go jump in my Dad's way back when box, and wala :lol:
Dug out the exact same scope with lens covers and all - Quite the scope in their day from my understanding.
GSSP - Phenominal rifle you have there !
I had to laugh just a little and go jump in my Dad's way back when box, and wala :lol:
Dug out the exact same scope with lens covers and all - Quite the scope in their day from my understanding.
GSSP - Phenominal rifle you have there !
Desert Fox
Handloader
- Aug 14, 2006
- 1,965
- 3
Powerstroke":11k8dt7x said:
Mark, I don't know how old is the scope. I bought it at e-bay. It's almost brand new. No sign that it ever been mounted.
