Primer Sealant

[dcopp75]

I was wondering if any one uses a primer sealant on their reloads? I did not find any posts on the subject and was interested in any feed back and experences.

 

[JD338]

Its not rally needed.

JD338

 

[JungleJim]

I use George & Roy's primer sealant on loads to be used in hunting conditions. It rains a lot in some of the areas I hunt in the Pacific Northwest. Moisture has a way of finding its way in everything around here. I consider it good insurance.

 

[Mike Fontaine]

dcop75,
I have some experience with bullet/primer sealer. I replied to a post sometime ago. Here it is:
http://www.noslerreloading.com/phpBB2/v ... highlight=

I only use the sealer on my hunting loads secondary to the conditions/elements.
Hope this helps, Mike Fontaine

 

[dcopp75]

Thanks Mike.

I was going to do a similar test with submerging a few rounds in water, but i see it was already done. I always figured that if water could easly get in through the primer, there would be a burnt on residue around the primer from the primer ignition before it could be sealed by the pressure. However, I have never seen this except from very high pressures and a backed out primer.