110 accubond loads for 25/06

[mray_190]

Somebody help me I have a Sendero 25-06. Im trying to get the new 110 Accubonds to shoot. I shoot 115 Berger vld's now and they shoot better than half inch groups at 100 yds. I have tried these combinations IMR 4350 48.5 - 50 grs. and IMR 4831 51.0 - 52.0 grs. The best group I could get was just over 1 inch (nowhere close to acceptable). I dont have any data for 110's in any of my manuals.

 

[FOTIS]

Try RL 22, RL 25, IMR 7828, H4831, even H1000 works. Start at 50 gr and work up. In my experience the slower (burning rate) the better in the 25-06.

 

[rick smith]

I have found better grouping in 25/06 when I used Mag primers.Rick.

 

[mray_190]

somebody give me some min. and max. for those powders using a 110 gr. im not the best at noticing excessivce pressure so i like to go with printed data.

 

[JD338]

mray_190,

You need to be aware of high pressure signs any time you reload. Every gun is unique and even printed data can exceed the pressure limits.
That is why we are constantly reminded to work up carefully to printed Max loads.
I wouldn't want to see you or anyone else get into a potential problem. :grin:

Regards,

JD338

 

[FOTIS]

somebody give me some min. and max. for those powders using a 110 gr. im not the best at noticing excessivce pressure so i like to go with printed data.

See my above post