So i had a chance to get out the the casselton range today to try out some new loads with IMR XBR 8208 in my 22-250. It was nice out today about 18 degrees and little to no wind which is odd for this time in north dakota.
I started the loads off at 33 gr and worked my way up to 36 grs. in .5 grain incraments. The loads starting at 33 to 34.5 were horrible, they shot about 1.5 to 2.5 inches. Thinking it was my shooting i shot a group with my go to load with H380 and they grouped just fine. Once i got to 35 to 36 grains the groups closed up considerably. the better group of the day was 35.5 grains of XBR which shot under 1/2 moa at 100 yards.
Load info:
Brass- Winchester
Primer- CCI BR2
Bullet- 50 gr NBT
Powder- IMR XBR 8208
C.O.A.L.- 2.490
Here is a 3 shot goup with 35.5 gr of 8208
I started the loads off at 33 gr and worked my way up to 36 grs. in .5 grain incraments. The loads starting at 33 to 34.5 were horrible, they shot about 1.5 to 2.5 inches. Thinking it was my shooting i shot a group with my go to load with H380 and they grouped just fine. Once i got to 35 to 36 grains the groups closed up considerably. the better group of the day was 35.5 grains of XBR which shot under 1/2 moa at 100 yards.
Load info:
Brass- Winchester
Primer- CCI BR2
Bullet- 50 gr NBT
Powder- IMR XBR 8208
C.O.A.L.- 2.490
Here is a 3 shot goup with 35.5 gr of 8208