I bought a can of Reloader 15 not having any idea what I would use it for. After reading Sako 85's thread on the 375 and Nosler AccuBond I couldn't resist trying a load with some 260 grain factory 2nd Partitions I recently purchased from the pro shop.
The first three shots printed as below. I'm plenty satisfied with this as this is with a 4 power scope and my eyes aren't that good. I actually had to replace the original target I hung with this design as I couldn't see the original well enough to pull the trigger.
I added a slight crimp with a Lee Factory Crimp die.
This load barked and kicked enough to where I have no desire to up it to Nosler's max load.
The first three shots printed as below. I'm plenty satisfied with this as this is with a 4 power scope and my eyes aren't that good. I actually had to replace the original target I hung with this design as I couldn't see the original well enough to pull the trigger.
I added a slight crimp with a Lee Factory Crimp die.
This load barked and kicked enough to where I have no desire to up it to Nosler's max load.
