longrangehunter
Handloader
- Jun 19, 2011
- 1,479
- 7
Hey guys,
I have a new rifle for a 2 man Team LR Tactical Match, a Daniel Defense MK12 5.56 NATO, wears a 18" BBL. 1:7" Twist. I wanting to use the bag of Military Brass I won last year, looks like a 1,000 pieces to me and it appears to be all FC 12 223 REM Brass. It's all cleaned, sized, and trimmed. I'm not familiar with this brass, and whether or not it's as tough as the military L.C. or W.C. brass. Does anyone here know?
I'll have to load up a few to test fire and then weigh them for H2O capacity.
I'm curious to know how much of a difference my other load for the M4 load developed for a 14.5" BBL 1:7" vs. the MK12's 18" BBL 1:7" will have on the OBT?
The M4 load was a follows:
77 SMK
22.8 H335
CCI-41
L.C. Brass @ 2.260" coal
(This is very close to the node 6 @ .804 ms.)
Since the DD MK12 wears a longer barrel I my attempt to use the RL-15, or RL-17 I have on hand (none of which is being used for anything else), VarGet, H4895, H322, BL-C(2) I have a little VV N133 <2lbs. I could go out an buy something else, but I'd prefer to use what I have on hand?
I've heard a few guys have been having good luck with IMR8208 XBR with the 77 SMK.
Thanks guys.
PS: I have not even shot this as of yet, but I plan on doing that tomorrow.
I have a new rifle for a 2 man Team LR Tactical Match, a Daniel Defense MK12 5.56 NATO, wears a 18" BBL. 1:7" Twist. I wanting to use the bag of Military Brass I won last year, looks like a 1,000 pieces to me and it appears to be all FC 12 223 REM Brass. It's all cleaned, sized, and trimmed. I'm not familiar with this brass, and whether or not it's as tough as the military L.C. or W.C. brass. Does anyone here know?
I'll have to load up a few to test fire and then weigh them for H2O capacity.
I'm curious to know how much of a difference my other load for the M4 load developed for a 14.5" BBL 1:7" vs. the MK12's 18" BBL 1:7" will have on the OBT?
The M4 load was a follows:
77 SMK
22.8 H335
CCI-41
L.C. Brass @ 2.260" coal
(This is very close to the node 6 @ .804 ms.)
Since the DD MK12 wears a longer barrel I my attempt to use the RL-15, or RL-17 I have on hand (none of which is being used for anything else), VarGet, H4895, H322, BL-C(2) I have a little VV N133 <2lbs. I could go out an buy something else, but I'd prefer to use what I have on hand?
I've heard a few guys have been having good luck with IMR8208 XBR with the 77 SMK.
Thanks guys.
PS: I have not even shot this as of yet, but I plan on doing that tomorrow.