Fighting a cold here so decided to head to the shop and try out the Annealeez for some low impact exercise.
I’ve acquired quite a bit of 223 brass and wanted to try to anneal them before turning them into 6mm, 6.5mm and 7mm TCU ammo.
Machine worked well. The Gen 3 model has a muffler clamp for a propane bottle holder.
Was a bit skeptical but I think its probably much easier to adjust the location of the flame with than the previous models that had a hose and bolted on torch holder.
Did some 308 and 30-06 brass later.
I’ve acquired quite a bit of 223 brass and wanted to try to anneal them before turning them into 6mm, 6.5mm and 7mm TCU ammo.
Machine worked well. The Gen 3 model has a muffler clamp for a propane bottle holder.
Was a bit skeptical but I think its probably much easier to adjust the location of the flame with than the previous models that had a hose and bolted on torch holder.
Did some 308 and 30-06 brass later.
