TackDriver284
Handloader
- Feb 13, 2016
- 2,560
- 2,142
I have no need to test bullets since my rifle loves the Ballistic Tips and ELD-X, but I'm bored and wanted to try the 147's in the 6.5 Creed. New Nosler brass, full sized bushing, .263 mandrel run through the necks, CCI 200 primer, H4350 and 147 ELD-M. Bullet kissing the lands is 2.277" and OAL was too long to fit the mag, so had to jump .064" thou to fit the mag, leaving some extra space. Conditions was hot, partly sunny and windy. It was a bit tough with the mirage since I was shooting almost mid day since it was humid this morning, so I went late to avoid the humidity. Speed is reasonable with the heavies using virgin brass, speed should increase some with all fired brass.
Nosler book max is 41 grains with 140 and 150 grain bullets. Hodgdon shows 41.8 grains as max as 2680 fps . No pressure signs. Results are great with a wide node and POI is on an horizontal plane and not bad on the first trip to the range. It would be interesting using the 147's on deer. Final tweaking soon with all fired brass.
41.3 grains 2,676 fps (average of 3 shots)
41.6 grains 2,691 fps
41.9 grains 2,705 fps
42.2 grains 2,738 fps
Nosler book max is 41 grains with 140 and 150 grain bullets. Hodgdon shows 41.8 grains as max as 2680 fps . No pressure signs. Results are great with a wide node and POI is on an horizontal plane and not bad on the first trip to the range. It would be interesting using the 147's on deer. Final tweaking soon with all fired brass.
41.3 grains 2,676 fps (average of 3 shots)
41.6 grains 2,691 fps
41.9 grains 2,705 fps
42.2 grains 2,738 fps
Last edited: