I'm aware of the valid reasons for advising against the use of lead sleds when sighting in rifles (broken scopes, cracked rifle stocks, etc.). However, in the interests of not further damaging my aging and surgically repaired shoulder, I'm thinking of acquiring and using a lead sled to sight in a light weight and high-recoiling hunting rifle I've recently acquired (Kimber 8400 in 325 WSM on which I've mounted a Trijicon Credo 3-9x40). Over the years, I've discovered that I'm less recoil sensitive than a lot of guys and it takes a lot to make me flinch, but I don't want to be foolish by not protecting my shoulder when firing repeatedly from a bench. My thought is that I might acquire a (somewhat) light weight lead sled that is (minorly) movable through the rifle's recoil and/or place some cushioning material between the back of the buttstock and the cradle portion of the lead sled. In other words, I'd use a lead sled but try to let the rifle move a bit. Of course, the alternative is to have a padded shoulder via a thick coat, folded towel, etc. Any thoughts about these options? Putting aside the use of muzzle brakes and suppressors for the moment, have you dealt with this "recoil" issue when sighting in a high-powered yet light hunting rifle and, if so, how? Thanks in advance for any experiences and opinions you may be willing to share.
With appreciation,
Cowboy307
With appreciation,
Cowboy307



