Nosler Reloading Forum
https://forum.nosler.com/

What I want for 2020
https://forum.nosler.com/viewtopic.php?f=4&t=39838
Page 1 of 2

Author:  1100 Remington Man [ Tue Sep 03, 2019 1:02 pm ]
Post subject:  What I want for 2020

I would like to see plastic tipped Nosler Partition bullets with slightly better BC. I would like to see a 6.5 plastic tip and slight boat tail between 120-125gr. with a BC above .480 and a 30cal plastic tip slight boat tail 180gr. I feel this would provide the best comprise of Peneration and long range expansion and bring the Partition into the next generation.
Yes I don't like the magazine box flatting tips during recoil.

What would you like for 2020 ?

Author:  desertcj [ Tue Sep 03, 2019 2:54 pm ]
Post subject:  Re: What I want for 2020

Same stuff I wanted and didn't get in 2019 and 2018...and 2017

6mm 70gr E-tip, 105gr ABLR

7mm 100gr E-tip, 120gr E-tip

Author:  SJB358 [ Tue Sep 03, 2019 6:45 pm ]
Post subject:  Re: What I want for 2020

1100 Remington Man wrote:
I would like to see plastic tipped Nosler Partition bullets with slightly better BC. I would like to see a 6.5 plastic tip and slight boat tail between 120-125gr. with a BC above .480 and a 30cal plastic tip slight boat tail 180gr. I feel this would provide the best comprise of Peneration and long range expansion and bring the Partition into the next generation.
Yes I don't like the magazine box flatting tips during recoil.

What would you like for 2020 ?


Didn’t you just Schwack a beautiful bull caribou with the 130 AB :mrgreen:

It might be just me, I love Partitions but I just think the Accubonds are just plastic pointed Partitions

Author:  elkhunternm [ Wed Sep 04, 2019 5:52 am ]
Post subject:  Re: What I want for 2020

400 grain .458" partition or ballistic tip.

Author:  Mlatimer [ Wed Sep 04, 2019 6:53 am ]
Post subject:  Re: What I want for 2020

Would like to see some more offerings in 17 caliber. A 30gr ballistic tip with a boat tail would be pert near unbeatable. You could make the tips teal!

Author:  FOTIS [ Wed Sep 04, 2019 7:47 am ]
Post subject:  Re: What I want for 2020

A 135gr 257 Accubond (NOT LR)
A 165gr 277 Accubond (not LR)
458 cal 300 PT bring it back
416 Etip---325 gr

Author:  1100 Remington Man [ Wed Sep 04, 2019 6:19 pm ]
Post subject:  Re: What I want for 2020

SJB358 wrote:

Didn’t you just Schwack a beautiful bull caribou with the 130 AB :mrgreen:

It might be just me, I love Partitions but I just think the Accubonds are just plastic pointed Partitions


Yes the Nosler 130gr AB performed perfect at the distance I used it at. I wonder at what distance or FPS without hitting bone what it really expands at ? Just wondering how far I can use it to.
I just don't know of another bullet that puts the wack of a copper core bullet and the Peneration of a copper bullet, like a Partition.

While the Nosler Partition is the Classic and first premium bullet it's ready to be upgraded IMHO. I also think it would set a new standard in long range bullets.

Author:  SJB358 [ Wed Sep 04, 2019 6:26 pm ]
Post subject:  Re: What I want for 2020

Well, I have seen the 160 ABs at similar speeds open just fine out to 450’ish. I wouldn’t worry a lick about your combo. While a poly tipped Partition would be neat the Accubond is a great bullet from just about every example we’ve found left in a dead buck or bull.

Author:  SJB358 [ Wed Sep 04, 2019 6:40 pm ]
Post subject:  Re: What I want for 2020

Image

Image

Image

Image

These are pretty neat though, but I don’t think they’ve made anymore since the 60’s. A poly tip would be pretty wicked too.


But, the good old Accubonds don’t leave too much behind.

Author:  26NosFan [ Wed Sep 04, 2019 6:53 pm ]
Post subject:  Re: What I want for 2020

6.5mm 156 or 160gr not ABLR AB/PT or BT
6.5mm 140gr E tip
6.5 Grendel ammo in the Noveske or SSA line

Author:  gerry [ Wed Sep 04, 2019 9:07 pm ]
Post subject:  Re: What I want for 2020

Wow Scotty those boat tail 139's are really cool, didn't know they made any like that.

I would like :

6.5 mm 155-160 gr Accubond or Partition
.277 160 gr Accubond (Thanks for the 150 gr Accubond you are now making Nosler)
.311 165-180 gr Ballistic Tip

Author:  Blkram [ Wed Sep 04, 2019 10:09 pm ]
Post subject:  Re: What I want for 2020

.375 220 gr Partition FP for the 375 Win/38-55 fans
.410 240 gr Partition for the 41 Rem Mag

Author:  SJB358 [ Thu Sep 05, 2019 10:31 am ]
Post subject:  Re: What I want for 2020

gerry wrote:
Wow Scotty those boat tail 139's are really cool, didn't know they made any like that.

I would like :

6.5 mm 155-160 gr Accubond or Partition
.277 160 gr Accubond (Thanks for the 150 gr Accubond you are now making Nosler)
.311 165-180 gr Ballistic Tip


You aren’t kidding Gerry! I’d love to have a couple 100 of them for my 264 Win Mag.

I could go for a 155-160 grain AB myself. That’d be a beast around 3000 FPS

Author:  1100 Remington Man [ Thu Sep 05, 2019 6:13 pm ]
Post subject:  Re: What I want for 2020

Man 50 years ahead of its time. Scotty that is sweet, wonder if it was also a two diameter bullet as well ?

Attachments:
image.jpeg
image.jpeg [ 79.82 KiB | Viewed 787 times ]

Author:  SJB358 [ Thu Sep 05, 2019 6:15 pm ]
Post subject:  Re: What I want for 2020

1100 Remington Man wrote:
Man 50 years ahead of its time. Scotty that is sweet, wonder if it was also a two diameter bullet as well ?


It sure was. If you look real close you can see the transition.

Author:  1100 Remington Man [ Thu Sep 05, 2019 8:10 pm ]
Post subject:  Re: What I want for 2020

I wonder how the long range accuracy was with these two diameter bullets in the .264 years ago ?
I know it was to reduce pressure to achieve higher FPS Load. Maybe something we need again in all bullets.
Who would not like a little more speed in there reloads.

Author:  SJB358 [ Fri Sep 06, 2019 4:06 am ]
Post subject:  Re: What I want for 2020

I have no darned idea actually. It was before my time.

Author:  bob_dobalina [ Wed Sep 11, 2019 4:36 pm ]
Post subject:  Re: What I want for 2020

For 2020 I'd like to see updated load data for all the "hot" new powders - mainly RL26, RL23, RL16 - where it made sense - mostly the 25-06 and 300 WSM for me, but I wouldn't turn down 300 WBY data. And, I'd like to see a high BC .257 bullet - 115 ABLR?

Author:  desertcj [ Wed Sep 11, 2019 7:24 pm ]
Post subject:  Re: What I want for 2020

bob_dobalina wrote:
For 2020 I'd like to see updated load data for all the "hot" new powders - mainly RL26, RL23, RL16 - where it made sense - mostly the 25-06 and 300 WSM for me, but I wouldn't turn down 300 WBY data. And, I'd like to see a high BC .257 bullet - 115 ABLR?


Right? Sorry Nosler, give the old school IMR powders a break. There's plenty of established load data for them already!

Author:  joelkdouglas [ Thu Sep 12, 2019 9:51 am ]
Post subject:  Re: What I want for 2020

I’d like a 7mm 175 Accubond (not LRAB).


Sent from my iPhone using Tapatalk

Author:  LeBlanc [ Thu Sep 12, 2019 11:07 am ]
Post subject:  Re: What I want for 2020

Would love to see 280 Remington loads at same pressure as the 270 win

Author:  longrangehunter [ Fri Sep 13, 2019 4:43 pm ]
Post subject:  Re: What I want for 2020

Wow, those are very old school Nosler's Scotty. It would be neat to drop something with them, but then again they're so old it would be cool to just save them for the nostalgia of having them around for "Show, and Tell".

Author:  SJB358 [ Fri Sep 13, 2019 5:16 pm ]
Post subject:  Re: What I want for 2020

longrangehunter wrote:
Wow, those are very old school Nosler's Scotty. It would be neat to drop something with them, but then again they're so old it would be cool to just save them for the nostalgia of having them around for "Show, and Tell".


I wished they were mine. You’re right though, I’d be all over the mountain with those loaded up in my 264 Winchester!

Author:  Blkram [ Fri Sep 13, 2019 10:45 pm ]
Post subject:  Re: What I want for 2020

LeBlanc wrote:
Would love to see 280 Remington loads at same pressure as the 270 win


+1
with both the 140gr and 160 gr AccuBonds!

While we are at it for +P loads, let's add the 6.5x55 with 140 gr AccuBonds for new rifles with stronger actions than those used in the World Wars. (The old Norma and Hornady Light Magnum Euro Spec loads both ran 140 gr ammo at 2780 fps.)

Author:  SJB358 [ Sat Sep 14, 2019 5:34 am ]
Post subject:  Re: What I want for 2020

Blkram wrote:
LeBlanc wrote:
Would love to see 280 Remington loads at same pressure as the 270 win


+1
with both the 140gr and 160 gr AccuBonds!

While we are at it for +P loads, let's add the 6.5x55 with 140 gr AccuBonds for new rifles with stronger actions than those used in the World Wars. (The old Norma and Hornady Light Magnum Euro Spec loads both ran 140 gr ammo at 2780 fps.)


So, here’s what I’ve done for the 280, just to get an idea what it’s capable of, I take a gander at the 270 Win data! I know it isn’t perfect but for most of the bullets except for the 175’s you can match them up with 270 Win 65k data. Both cases are darned near as close to the same as they could be and anything that is safe in a 270 will be safe in a 280 with an even larger bore.

As for the old Swede, Nosler has some great data for 140’s, which I think uses 22 for over 2800.. I’d like to see some modern pressure specs myself but using 260 data is a pretty safe way to roll as well.

Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/