K&M neck turner pilots

[Ridge_Runner]

anyone got a source for them? are they interchangable with other brands? K&M wants 14.50 for a .338 pilot, no problem till they added 23 bucks and change shipping, in a padded mailer they could send it usps for 2 bucks.

 

[RL338]

K&M Neck Turner Pilot 338 Cal

This steel neck turning pilot is specifically for the K&M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

www.midwayusa.com

 

[Ridge_Runner]

thanks, never thought about midway

 

[xphunter]

anyone got a source for them? are they interchangable with other brands? K&M wants 14.50 for a .338 pilot, no problem till they added 23 bucks and change shipping, in a padded mailer they could send it usps for 2 bucks.

Let us know if that works for you. I use K&M exclusively.

 

[Ridge_Runner]

Let us know if that works for you. I use K&M exclusively.

have used it for years on my 6.5 Gibbs cases, just starting to work on my 338 Edge and need to turn the necks .002

 

[AFG270]

I need to turn the necks on my 25-06 brass, Lapua 30-06 necked down, I have never turned necks in many years of reloading. I'm looking at buying a K&M Neck Turner, do I get one with a steel cutter or carbide cutter? Thanks

 

[RL338]

I use the Forster handheld neck turner with no complaints.

 

[Ridge_Runner]

I need to turn the necks on my 25-06 brass, Lapua 30-06 necked down, I have never turned necks in many years of reloading. I'm looking at buying a K&M Neck Turner, do I get one with a steel cutter or carbide cutter? Thanks

if I'm not mistaken, the pilots are what comes in steel or carbide, the carbide doesn't gauld the brass as bad inside the necks, but I know little about them.

 

[xphunter]

I need to turn the necks on my 25-06 brass, Lapua 30-06 necked down, I have never turned necks in many years of reloading. I'm looking at buying a K&M Neck Turner, do I get one with a steel cutter or carbide cutter? Thanks

I get the cutter with the donut remover