2013 Bullet Wish List

[gerry]

Some guys have mentioned something similar allready but a protected point version of the AccuBond would be great for heavy bullets in a given caliber and ones that have to be short because of magazine box limitations. They would also be cheaper than Accubonds and hopefully sell well for Nosler.

Some that I could use would be:

150-156 gr 6.5mm
200 gr 35 cal allready asked for in this thread
270-280 gr 35 cal
300 gr or heavier 375 cal

I'm sure you guys could fill in many more useful to you.

 

[adamjp]

6mm 70 grain AccuBond!

It would be great for the 6X45 crowd, and the odd ball 6X47 guys like me!

500 & 1000 bullet bulk boxes as well while were at it in the Ballistic Tips.

+1

The 6x45 is crying out for a good little 70gn HUNTING bullet that does not cost a fortune.

Other than that, a 100gn AccuBond twin for the 100gn 6.5mm would suit Grendel shooters nicely too.

 

[dragger201]

Bullet wish list???? Oh, yeah..........

Wish I could get a Nosler 130gr combo Partition/Ballistic tip in .270.

 

[SJB358]

Bullet wish list???? Oh, yeah..........

Wish I could get a Nosler 130gr combo Partition/Ballistic tip in .270.

You almost can buddy! The 130 AB is pretty near to it if there was an offspring between the two!

 

[BK]

300 grain e-Tip, or 325 to 350 grain Accubon .416s would be great!

 

[IdahoCTD]

300 grain e-Tip, or 325 to 350 grain Accubon .416s would be great!

+1 But I've been asking for that for years and so has Fotis.

 

[Trikstr]

How about a .308" 125 AccuBond.
Flat shooting within 400 yards and also reduced recoil in a bullet that will hold together.

 

[nvbroncrider]

7mm 175 AB
257 120 AB
6mm 100 AB
22 55 AB

I guess I just like the heavy for caliber lead.

 

[grry10]

I would like to see:

.172 30gr
.224 50gr (pelt friendly bullet for coyote)

:grin:

 

[SJB358]

358 250-275 AB! Did I already say that? :twisted:

 

[trsmith1818]

a fragible "varmint" bullet for my 30-06

 

[LD375]

a 350-380 grn part or ab bullet for 45-70. and anything for 264 and 35 whelen. The 264 120 grn ab would be great for antelope

RR, great point! Forgot to lobby for the 350 AB for the 45-70! Man, I am a little slow on the uptake sometimes!!

Matter of fact, if I could have any bullet, it would be a premium AB or PT in the 458 caliber in the 300-350 grain range made for the 450/45-70!

x2... :twisted:

 

[TRIC]

Protected Point in all current Partition offerings! I have yet to purchase any Polymer tipped bullet without having several bullets in the box having tips broken off/missing. Polymer tips will NEVER cross my bench again. Bring back the Proctected Point!!!

And, based on my own experience, why not make the E-tip minus the tip. Give the Barnes TSX some REAL compition...

 

[Woodycreek]

Think I have posted about these before but just in case...

45-70 300gr PT or AB
243/6mm 105gr AB or BT
308 220gr-240gr AB

 

[treesnake]

The Failsafe 2. (the original would be great too)

230 gr .338
140 gr .270
150 gr .308
180 gr .308
160 gr 7mm
and a new 100gr .25 version

 

[cooker300]

6.5 120 accbond
6.5 E tip

 

[Greg Nolan]

A 325 and 375 gr AccuBond for us 416 guys. An entire line of round point accubonds for tube feed calibers including 356 which would cover the 350 Rems also. (LeverEvolution eat your heart out :twisted: ). Speaking of 416s, I see Hornady has a 450 grain match bullet with a BC of over 700 that would look a lot better as a Nosler AccuBond, Ballistic tip or competition bullet.
Greg

 

[SJB358]

A 325 and 375 gr AccuBond for us 416 guys. An entire line of round point accubonds for tube feed calibers including 356 which would cover the 350 Rems also. (LeverEvolution eat your heart out :twisted: ). Speaking of 416s, I see Hornady has a 450 grain match bullet with a BC of over 700 that would look a lot better as a Nosler AccuBond, Ballistic tip or competition bullet.
Greg

Nice, those would be pretty sweet Greg. I am kinda eyeballing a 416 as my big rifle so some AB's to shoot out of it would be pretty cool to have..

I am all over the the Round Point BT/AB's for the 35's.. Anything extra for them would be great!

 

[BK]

Yeah, you need to try out an M70 Super Express .416 to let me know if I need one!

 

[SJB358]

Yeah, you need to try out an M70 Super Express .416 to let me know if I need one!

I'm on it!